Why are your tile floors so dull despite mopping them well? You get it out with the vacuum cleaner, the mop, perhaps by scrubbing on your knees and knuckles, but your tiles still don’t until you get to the fresh sparkle of glossy magazines or display homes. Ever thought of what is lacking? The thing is that tile floors might be considered lengthy free, yet they need a special type of care to keep them that way so that they can look as good as new.
Do you want to have clear tiles, clean grout or unstreaky finishing? Then you have reached the right place. The two things that you should remember to maintain patrician floors are using appropriate methods at the appropriate time no matter whether your floors were ceramic, porcelain or natural stone. So what I would like to do is take a walk about seven clever, useful methods of cleaning and maintaining your tile floor as a professional.
1. Vacuum or Sweep Daily to Prevent Grit Buildup
The main principle of keeping any kind of tile floor in order is to Bond Clean Toowoomba the dirt from the surface. A surface of dirt, sand and litter may appear to be harmless, but it is like running over sandpaper. Each time that one steps on a tile floor with grain underneath his/her footwear, it makes minute scratches that wear off the surface with time.
This is why sweeping or vacuuming is required. Pick up any particles using a soft-bristle broom or a hard-floor vacuum. Only several minutes a day can help to avoid long-term harm and make your floors look new longer.
2. Warm Wet Water and Gentle Cleaner Mopping
After eliminating dry dirt, a normal mop will be useful in eliminating footprints, food stains as well as spillages. However, it is not the trick to use too much detergent. Overuse of soap will also make the tiles sticky and more dirt will attach to the tiles.
Use only warm water containing a light floor cleaner with neutral pH. The best way to mop the tiles is by using a microfiber mop. Make sure that you rinse the mop regularly as well as replacing water that becomes dirty. To create shiny and streak-free tiles run a final pass with clean water only.
3. After Mopping, Dry Your Floors
Another one tip that is mostly ignored by the homeowners but always by professionals is to dry the floors after you have mopped them. It is possible to leave an unwanted moisture on the surface and it can result in water spots, in particular on glossy tiles and tiles made of natural stone. And worst, water that leaks to grout-lines may invite mould or mildew after some time.
Wipe down the tiles with dry, clean microfiber cloth, or a towel. It does not only prevent streaking, but also serves as a quick polish and allows to see any missed spots when mopping.
4. Watch out the Grout lines
Grout is the unsung hero of your floor and tiles may be the star. The bad news is that it is also the dirtiest. Since grout is porous, it will readily absorb spills, oils, and dirt leading to stains and even molds.
Set the weekly routine of cleaning grout twice a month. It is possible to make a paste of some baking soda and water, use this in the grout lines and then scrub lightly with an old toothbrush. A more thorough clean can be achieved using some vinegar and water, but this mix works better on surfaces that are not made of natural stone (vinegar etches such surfaces).
5. Make use of floor protectors and Doormats
Prevention is undoubtedly one of the easiest and at the same time the best tile floor care maintenance techniques. Put doormats at all the entrances of your house in order to lessen the quantity of soil and moisture that is going to be lugged in. One would be surprised at the amount of dirt that is prevented simply by having people wipe their feet.
Further, place chair pads or floor protectors under tables, heavy furniture and under chairs. This will stop scratching and cracking of tiles and will extend your tiles much further in terms of finish.
6. Avoid Sharp Chemicals and Instruments
When you observe a tough stain you are tempted to use a powerful cleanser or metal scrub brushes but go easy. Tile surfaces can be ruined by harsh chemicals such as bleach or ammonia and grout can be discolored. The finish might be scratched and even chipped with abrasive tools.
Remain with soft, tile-friendly products and employ soft cloths or non terrific scrubbers. When you are not sure whether a given product is safe or not, first apply on a small, concealed part.
7. Lock up your Grout Regularly
Not every tile requires sealing but most natural stones i.e. slate, marble and granite should and can do. What is more important, grout always is benefited by sealing. Sealant prevents grout falling into moisture and stains and makes it more simple to clean.
It is a puncturing grout sealer, and it should be applied once or twice yearly depending on the traffic of the home. It is particularly important to seal areas that are likely to have a lot of moisture such as the kitchen and the baths. Note that good results always come with following the instructions on the manufacturer and letting the finished product dry.
Conclusion
Doing these seven smart things to clean and maintain tile floors needs to be a lot more than chores since you are merely taking care of one of the most valuable surfaces of your home. Therefore, take that broom, wash that mop, and clean your tiles with the attention which they need. The results will become obvious when you step across the room.